Two-post car lifts have four arms, one asymmetric and one symmetrical, which are strategically positioned under the vehicle to help with weight distribution. The correct placement is vital for safety and stability of the vehicle. Improper positioning can damage the vehicle and cause accidents. Get help from Mechanic Superstore 2 post car lifts: full feature set.
Space requirements for a 2-post car lift
When choosing a car lift, make sure to consider the height and width of your garage. You need about 12 feet of space above the floor, and you should have six feet of clearance underneath the lifted car. Depending on the type of lift you purchase, you may need to adjust the height of your ceiling as well.
There are no hard and fast rules when it comes to space requirements, but there are some important considerations. A two-post lift needs about two feet of space between the sides of the vehicle and the lift. Any less space will cause movement problems and limit the ability to remove the lift's components.
There are several different types of 2-post lifts, with capacities ranging from 6,000 to 30,000 pounds. These lifts don't always lift the weight of the car evenly. In fact, the majority of the vehicle's weight is likely to be concentrated at the front or rear of the vehicle. For example, a Ford F-450 loaded with tools and a one-man bucket may weigh nearly 11,000 pounds.
Types of 2-post car lifts
A 2-post car lift is one of the most important pieces of automotive equipment. It allows a technician to check the underside of a vehicle without having to stand on the ground. This helps prevent an unbalanced center of gravity, which is dangerous. These lifts are available in two different styles: asymmetric and symmetrical.
Frame contact 2 post lifts are secured to the ground by large bolts. To remove the lift, you must loosen the bolts holding the posts together. You may need to use a power drill, impact wrench, ratchet set, and other tools. Be sure to follow the manufacturer's recommendations for lifting.
Once you've inspected the two-post lift's safety features, you'll be able to remove it yourself. First, disconnect the power supply. Then, remove the lift's base plates. This step may take a while, depending on the lift's design.
Specifications of two-post car lifts
One of the most important specifications of a two-post car lift is the position of the frame contact pads. Lifts with drive-on runways are susceptible to getting in the way of the underside of the vehicle, and this can make access difficult. However, lifts with two-post bases do not have this issue.
The arms of a two-post lift should not exceed one quarter of the total lift capacity. Four-post lifts, on the other hand, should be able to support at least 15,600 pounds. Many lifts have been made with forklift-style C-shaped channels to replicate the way forklifts go up and down.
Depending on the size of your shop, two-post car lifts come in a range of heights and widths. In addition, a two-post model can be built with a cable-free design so that it can fit in almost any environment. The BendPak Clearfloor two-post car lift provides unobstructed floor space and allows you to move automotive equipment under the lifted vehicle without a hindrance.
Requirements for installing a 2-post car lift
Before you install a two-post car lift, you should have a clear understanding of the installation requirements. Generally speaking, the lifts should sit on a flat surface with a minimum of three inches of clearance around each post. Depending on the size of the lift, you might need to add a concrete pad or other type of support to make it more stable. If you are going to use concrete, you should make sure that it is at least six inches thick.
Regardless of whether you have a flat surface or a curved surface, it is important to consider the placement of the lifting points to avoid a misaligned center of gravity. Incorrect lifting points could lead to an unbalanced center of gravity, which can increase the risk of a vehicle falling.
The concrete floor should be aged and be firm enough to support the post car lift column. If the concrete slab is not thick enough, you should install a wire mesh reinforcement to ensure that it is strong enough to support the lift. Also, the location of the lift should be carefully checked using floor plans or architects' plans. You should also ensure that the area is clear of overhead obstructions, heaters, or any other electrical lines. Also, you should check for cracks and holes in the concrete slab where you plan to place the lift.